Sunday, November 27, 2022
No menu items!
HomeGeneralHow To Install And Maintain An Industrial Swamp Cooler?

How To Install And Maintain An Industrial Swamp Cooler?

Many people seek low-cost industrial swamp coolers to keep their homes and businesses cool during the summer. Cooling homes and businesses with an industrial evaporative cooler is a cost-effective and efficient solution. For the system to work properly, it will need regular maintenance and proper installation.

7 Tips To Install Industrial Air Coolers

1. Installation Of The Cooler

A commercial air cooler should be placed outside your home or business. You can mount the cooler in different positions depending on which type you have.

  • Roof-mounted air conditioners are the most common, but they can be more difficult to maintain.
  • Window/Wall Mounted: It is easy to maintain a wall/window-mounted device. They reduce the risk of leakage from your home. However, it is important to keep in mind that wall/window-mounted coolers direct cooled air from the home to a concentrated area. These coolers are ideal for smaller homes and larger flats that have custom-built ducting.

2. Installation Height

At least 10 feet from any plumbing fan vents or exhaust fan vents, industrial air coolers must be at least 3 feet below these vents. Keep solvents, gasoline, and lawn chemicals away from the cooler.

3. Take A Look At The Float

Always check the float valve after each pumping cycle. You can avoid setting the float too high and causing the water reservoir to overflow.

4. Maintenance Range

Maintain a minimum of 3 feet clearance from equipment that needs maintenance access. This code requirement applies to all electrical components.

5. Closed-Eye Hooks Are A Good Choice

Closed-eye hooks are best to secure and hang coolers. Remove the frame carefully so that the chain doesn’t come undone.

6. The Water Supply Line

An industrial air chiller requires a steady supply of water. Use cutoff valves to connect the water line from the external water source to your system. A cutoff valve is useful when you have to drain your system before the winter season begins to prevent damage from severe weather.

7. Turn On The Power

Make sure your cooling system is not leaking before you turn it on. To prevent cooled air from escaping the system, make sure to fill any empty spaces around the cooler. After you have checked that all components are properly installed, you can turn the cooler on. It is highly recommended that you seek the help of an electrician if you have any questions about electrical connections.

Maintenance Tips For Industrial Coolers

Industrial evaporative coolers can be a great choice if you require cooling for your business or industry. Here are some tips for maintaining industrial air conditioners.

  • Preparing Your Industrial Evaporative Cooler for Winter
  • To prevent rusting, turn off the water supply and hose out the pan.
  • Regularly changing the swamp cooler pad

How Often Should Industrial Evaporative Cooler Pads Be Changed?

1) Reduced Airflow

The particles trapped in the pads could be the reason your industrial air conditioner isn’t cooling as well as it once did. It would be cost-effective to replace the pads to fix the problem. It does not solve the problem. You should try more troubleshooting.

2) Types Of Material

The type of material used in pads is one of the factors that will determine if a pad should be replaced every year or can last for many years. Pads made from cellulose are less likely to need replacement. However, pads made from less expensive materials like aspen may still need to be replaced every year.

3) Annual Maintenance

The pads don’t need to be changed every year in general. It is best to replace a pad that has lost its thickness or has become brittle.

Advertisingspot_img

Popular posts

My favorites

I'm social

0FansLike
0FollowersFollow
3,584FollowersFollow
0SubscribersSubscribe