Quality Sprinkler Systems are easy, water-efficient ways to keep your yard green. The system’s programmable schedule irrigation and strategic placement of sprinkler heads ensure that the lawn is watered evenly. The system can be modified to deliver optimal watering depending on the season or need. But they also require their maintenance to ensure that the lawn is maintained.
These tips and tricks will make your sprinkler system run smoothly for many years. While some tasks should be left to an irrigation professional, others can be done by the homeowner.
Do Clean Your Sprinkler Heads
Sprinkler heads may become clogged quickly with dirt and other ground debris. The distribution of water throughout the lawn can be affected by clogged sprinkler heads, leading to patches that are more dry and brown than others. Sprinkler heads must remain clean and clear to ensure the system runs smoothly.
You should set aside an annual reminder to clean the sprinkler head to ensure water flows properly and water pressure is consistent. You will need to turn off the irrigation system to remove and soak the nozzle. Your irrigation system manufacturer can guide how best you can clean sprinkler heads. Make sure you immediately fix any clogs or dry spots that might occur during use.
If you notice a damaged part from the last time that you mowed the lawn, follow this step-by-step procedure to replace the sprinkler heads.
Do Not Ignore Leaky Sprinklers
Like most plumbing problems, a small leak can lead to bigger problems. Your lawn and garden could be getting too much water from the leak, and your water bill could increase due to the unneeded use.
The overall water flow throughout the sprinkler system should be monitored. Water pressure should be consistent. Also, ensure there aren’t any areas that are drier and wetter than the rest of your lawn. Take immediate action if there is a leak in the sprinkler or puddles around the lawn. For steps to repair a leaky sprinkler, consult a sprinkler installation guide or call an irrigation specialist sprinkler repair Denver.
Make Sure To Inspect Valves
Bad valves are often responsible for sprinkler system leaks. These plastic parts control the flow of water from the main source to the rest. They are also known as valve assembly (or manifold).
As with any system issue, indications of a valve problem are irregular water pressure and wetter/drier areas. Inspect the valves of both the central valve unit and the individual sprinkler heads. Also, check the coordinating areas for the grass. The central assembly can either be located underground or above ground and is often near the house. You should inspect each valve for cracks, rips, and other signs that indicate disrepair.
Faulty Pipes Can Be Repaired
A good condition pipe is essential for water flow. Pipes are susceptible to normal wear, but also other unfortunate events like a burst or accidental puncture or a fight with a garden spade. Similar to a leaky pipe, you should be attentive to the water flow in your lawn and pay particular attention to inconsistencies. The pipes could be damaged if they appear to have all the parts and valves in working order. Refer to the instructions for repair and any other manufacturer’s materials as soon as you can. You can find most replacement parts for pipes at big-box stores.
Do Test The Voltage
Use a multimeter to measure voltage. Test the voltage of sprinkler systems to find out how well all electrical parts (transformer, solenoid controller, solenoid, and wiring) are working together. Standard sprinkler systems are capable of operating at 24 volts (or “24 VAC,” on a multimeter), although it is possible to operate in a range from 22 to 28. Multimeter tests are easy to do, but electric repair work of any type should be left to an electrical contractor or an irrigation specialist in this particular case.
Do Not Neglect Transformers
Without a transformer that can power the sprinkler timer, pipes, valves, sprinkler head, and water, nothing will happen to the lawn. You can test this electrical part using a quality multimeter. This will ensure that it is functional. This measurement determines whether the transformer is in good health or needs replacement. Additionally, you should inspect the transformer for signs of wear or tear such as fraying. Also, be attentive to the system’s performance. Is the system running on time? If not, the controller could not receive enough power to complete its task of keeping the system on schedule.
